Single Phase HV 200 Kvar Capacitor Bank For Power Factor Improvement

12/√3kV High Voltage Capacitor Bank 200 kvar Capacitor for Power Factor Improvement

High Voltage Shunt Power Capacitor BAM12/√3-200-1W,High Voltage Capacitor Bank

1. Overview of High Voltage Shunt Power Capacitor BAM12/√3-200-1W,High Voltage Capacitor Bank

     High-voltage shunt capacitors are used to compensate for reactive power in the AC power system of 1000 V above voltage, frequency 50Hz or 60Hz,improve power factor, reduce line loss and saving energy,improve the quality of the power supply. The product performance conforms to GB/T 11024-2001, the standard requirement of the series standard for the use of parallel capacitor for AC power system with AC power system of 1kV above voltage.(GB/T 11024—2001 same as IEC 60871—1997).

2. Function of High Voltage Shunt Power Capacitor BAM12/√3-200-1W,High Voltage Capacitor Bank

       Middle voltage shunt capacitor/High voltage shunt capacitor are suitable for 50Hz or 60Hz AC power systems to improve the power factor of the power system, reduce line losses, improve the quality of the power supply voltage, and increase the active output of the transformer.

3. Main features of High Voltage Shunt Power Capacitor BAM12/√3-200-1W, High Voltage Capacitor Bank

• 3.1 Casing: Cold-pressed, anti-fouling type casing is adopted, and the creepage distance is not less than 31mm/kV.
• 3.2 Mature internal fuse technology.
• 3.2.1 After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.
• 3.2.2 Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.
• 3.2.3 The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.
• 3.3 Liquid medium: 100% insulation oil (NO PCB) is used. This liquid has excellent low temperature performance and partial discharge performance.
• 3.4 The main insulation adopts a composite insulation structure, which not only guarantees excellent electrical performance, but also has a certain degree of mechanical strength, which ensures that the insulation of the capacitor complete set of devices is 100% reliable without protection.

 4. Applicable standard of High Voltage Shunt Power Capacitor BAM12/√3-200-1W, High Voltage Capacitor Bank

     IEC60871 or equivalent

5. Working Conditions

• 5.1 Applicable for indoor or outdoor
• 5.2 The altitude of the installation site generally does not exceed 2000 meters
• 5.3 Temperature category: -40/D
• 5.4 There is no gas or steam that is severely corrosive to metals.
• 5.5 No strong mechanical vibration